Whether your company is currently in need of formulation design, you need manufacturing support, or perhaps you wish to obtain effective REACH compliance, hiring the right research, analytical and development services is a must. Covering your requirements can be quite challenging, considering there might numerous particularities and details involved, so collaborating with a company that can provide you with support is necessary. There are firms on the market which stand at your disposal with a contract laboratory, and can provide you with a wide range of services, which fall within the research and development category. In order for the support you access, regardless if it’s surface area and pore size analysis or another similar process, you should find yourself the best specialists to work with, and that involves focusing on a few relevant factors.
When you are seeking offers, the first thing that you should do is request information regarding the ecology used for the process you are interested in. In order for your manufacturing actions to actually benefit from the best analysis or research support, your partner should hold advanced equipment and technological devices. Even if you might not know that much on the topic, with a bit of research, you can conclude if the company you have come across really excels in this department. The techniques used are also extremely relevant, so find out more details about their particle size analysis methods, or other procedures before you actually sign a contract.
To avoid potential complications, always work with authorised professionals. Is the research, analytical and development third party actually certified to handle those analytical techniques? Can they prove their independent contract laboratory is authorized and holds all legal pipework? This is an important step you should not skip, especially if you expect high quality. Usually, companies that offer services that revolve around research and development will be able to provide you with accurate answers regarding their certifications and authorisations, but don’t hesitate to ask if you have any misunderstandings or questions.
Last but not least, make sure the company you decide to collaborate with values communication with their clients. Regardless if they might benefit from the most advanced laboratory, or they might be using the best technology currently on the market, if they are unable to communicate effectively when working together, many inconveniences can arise, and you might not obtain the desired results on time. When contacting a firm or another, make sure to check how much they value customer support and client satisfaction – this will make the services received as effective and timely as you desire.
Regardless of the particularities of your company, benefiting from professional support in the research, analytical and development departments is necessary, if you want to maximize the efficiency and reliability of your manufacturing processes. In order for your needs to be fully covered at all times, collaborating with a team of specialists will be necessary. More companies are choosing to work with Escubed, which remains a viable option for a wide range of services in this sector, including particle and pore size analysis.
If you have not been working in a laboratory, then the chances are that you are not familiar with what surface area analysis and pore size measurement is. Just for your knowledge, it is a method that is used for determining the physical absorption of liquid, gas or solid molecules, with the convenience of being able to measure the porosity as well. An examination of this kind provides a great deal of information concerning the features of solid materials, more precisely, of their behaviour. By features, it should be understood reactivity, catalysis, separation, and dissolution. It is only normal to want to know why it is necessary in the first place to understand characterize surface. Taking into account that surface area has a direct impact on the dissolution rates of products, like pharmaceuticals, it is essential to know things about the surface area and pore size in order to better take advantage of the surface in specific applications. Surface area and pore size analysis is therefore necessary.
There is a close connection between the surface area and pore diameter. Particles that present smaller holes have a singular surface area. The number of pores can be either small or big. It must be noted that errors are likely to occur when making measurements. Before taking action, it is important to clear away contaminants like water and oil. The reason for this is that they affect the results of the examination. The efficiency and reliability of the particle size analysis methods depends a lot on the condition of the surface. When the sample is perfectly clean, they can be analysed. The technology that is commonly used in laboratories like escubed is gas absorption technology. What happens is that gas, such as liquid nitrogen is placed onto a solid material. A gas sorption process takes place and it is the job of the specialists to oversee this process. The method implying the use of liquid nitrogen is efficient in the sense that it identifies the complete surface area of the atoms.
It is important to make mention of the fact that there are limitations. In the event that the sample is too big or the material does not provide enough surface area, then the results are not reliable. Generally speaking, surface area and pore size analysis are used in pharmaceutical applications, although it is not uncommon to be utilized for paints and cosmetics. In manufacturing, information of this kind is essential. For someone who is a beginner in the field, all the things mentioned earlier may seem frightening. The matter of the fact is that porous material characterization is not as complicated as it may sound. People who need to know all about surface area and pore size should refer to a specialized laboratory. Laboratories have special equipment, being able to offer reliable results. They can produce results via the classic or modern methods. The main idea is that the work should be undertaken by qualified professionals. It is also possible to approach a chemistry research centre.
Different living environments come with their very specific challenges when it comes to the construction field. This is a thing that every constructor in the world is going to tell you when deciding that you want to build a new home. Heat, cold and bad weather exposure will certainly affect the way your property will resist in time and the quality of your experience as an inhabitant. But also, homebuilders know exactly what to pay attention to when considering such projects. And this is the quality of your building materials. While you won’t be building the home yourself, you must discuss your preferences with the team that you will hire. Below you will find some advice on what to pay attention to in your discussions.
Pick a construction team with experience in the type of environment in which you live seems to be the first piece of advice many constructors give. This is a crucial factor that must be taken into account, because different areas come with different requirements. Advisable would be to collaborate with a local construction team, as they also offered their services in an area with similar specifics like yours. Experience in the same construction area will give you the certainty that every material used in the process, from the asphalt used for your driveway, to the aggregates used for your alleyways will behave extraordinarily in the weather conditions in the area. This means that on the long run, you will experience lower maintenance costs and efforts that you put into maintaining your new property in perfect shape and form.
Moreover, you should certainly pay attention to the suppliers with which the construction team is collaborating. For instance, your construction team must pick asphalt aggregate suppliers with experience in all areas of the construction field, from commercial clients, to public entities and private consumers. This will give you the certainty that the products they have are in a great quality, are long-lasting, and ultimately, that they follow all the rules and regulations when it comes to quality standards and not only.
The price is not everything that matters, especially when building your own home. Make sure that you don’t let yourself tempted by teams that offer dubious prices, since you might end up with an equally dubious quality. A price that is too low will impact first the quality of the materials used in the construction process, because certain companies specialised in these, like Medway Aggregates certainly can’t afford to lower their prices too much. This always compromises the quality of the products, which ultimately, will only lead to increased maintenance expenses. Aggregates in a poor quality are easily penetrable by unfavourable weather conditions, which makes them a bad investment from the very beginning. It’s always great to find the middle path when it comes to construction materials.
In conclusion, when you plan to build your own home, you must first pay attention to the team of constructors, and then the quality of the construction materials. You want a trusty supplier, like Santander Salt, because these companies will always offer an impressive quality.
Most of the objects that we use daily are developed based on a highly scientific process. We are speaking of particle analysis, pore analysis and viscosity analysis. These methods are widely used in all industries, from the food-processing industry, to the cosmetic industry and especially pharmaceutical industry. This way, manufacturers have the possibility to deliver better products, of a higher quality, regardless, below we have some daily applications of surface area and pore size analysis.
More than 234 million people suffer from asthma worldwide, from both wealthy countries, as well as less affluent countries. The standard treatment in this affection is coming in the form of an airway-administered. Inhalers help asthma sufferers to eliminate the discomfort usually experienced. However, the effectiveness of these devices varies considerably, based on several coordinates: the way in which the inhaler is built, the particle size of the medication used, the respiratory capacity of the user, as well as the administration technique. While the last two cannot be controlled by the manufacturers, they can make sure that an effective inhaler is built, by adapting the particle size and the construction of the device. In terms of particle size, the smaller, the better. This way, the medicine is pulverized more efficiently, and regardless of the sufferer’s administration method or respiratory capacity, the substances will reach the lungs.
The beauty industry is using at a large scale, various particle size analysis methods. Because the science behind these methods is deeply scientific, certain methods assure the development of better products, products that most of us are using every day.
- Emulsions are an oil and water mixture, which are difficult to develop in the lack of a deep analysis of particle behaviour. Size and distribution are two important variables that must be always adjusted in order to create high-quality emulsions.
- Foundation manufacturing company also invest plenty in particle analysis services, as this allows them to develop better and better products. The distribution and size of the particles in the foundation influence greatly the product’s stability rates and other crucial features (like the oxidation time).
- Lipsticks are also developed by using the same methods, because the product’s stability levels must be accomplished in order to deliver lasting products and vibrant colours.
The food and beverage industry
Taste is strongly influenced by the size and distribution of the various components of each food or drink. For instance, chocolate has to have a certain composition, as well as distribution and proportions of the components in order to achieve the so-called “mouth feel”. Due to this reason, manufacturing companies in the industry always make sure that they either establish a dedicated department inside their company, either hire a dedicated team from a professional company like Escubed.
These are only a few of the industries in which these methods are used in order for better products to be achieved. Without an exaggeration, we could say that these methods are used at such a large scale, that all the products in our daily lives are based and developed on them.
In an automated society, and especially industry, manufacturers must be mindful in terms of processes used in the manufacturing flow. One important aspect that not many of us think about is the necessity of investing in particle size research. But why is this? What has a complex process like this to do with coffee, sugar or even cement? Well, the distribution of the particles has a word to say in terms of taste, texture and resilience. So, manufacturers in all industries must invest in such studies before establishing manufacturing norms. And this comes to improve the quality of their products and the satisfaction of their clients. Below we have some modern industries that advantage of such studies.
- The pharmaceutical industry
Drug development relies entirely on various particle size analysis methods. From suspensions, to capsules, their efficacy and efficiency depends on the drug’s particle structure. Drug manufacturing depends on various coordinates, as it follows.
- Blend uniformity;
These all will determine how efficient and responsive the drug will be. This is why modern society needs particle size analysis and surface are and pore size analysis. Asthma puffers are using this method at a large scale, because as studies have shown, asthma sufferers almost never use their inhalers correctly. Because of this reason, pharmaceutical companies adapt the product in such a manner to increase the efficiency in real-life circumstances.
- The construction industry
Construction materials, in order to acquire the perfect molecular structure, must be analysed by using the same intricate analysis methods. These methods are necessary to improve two main variables: the manufacturing costs and the final products’ performance. Adapting the particle distribution and size will allow manufacturers to decrease the manufacturing costs and to create more durable materials.
- Road safety
Road safety is yet another area in which manufacturers play a lot with particle size in order to increase the efficiency of their products and approaches. Mainly used for reflective surfaces on the road, the reflective glass beads used have a perfect distribution, as well as few impurities. For this purpose, companies that specialise in such materials invest plenty in adapting their products in such a manner to increase their efficiency.
- The cosmetic industry
Yet another industry in which particle size analysis and distribution is widely used is the cosmetic industry. From eyeshadow, to lotions, and face masks, they all rely on the complex particle size analysis method. Manufacturers must always find out the best composition in which the products show most effective, so continuous developments and adaptations are necessary. Lipstick colours, foundations, they all use variations or different methods of improving and adapting the particle size.
- The food and beverage industry
Taste, texture, and consistency of food and beverages are widely affected by the size and distribution of the particles inside those. Because of this reason, continuous adaptations must take place in order to acquire the best final product.
These are some ways in which particle size analysis techniques make themselves useful in the modern society and industry, and Escubed is one of the companies that help manufacturers attain the best quality.
Even if it takes place at the end of the manufacturing process, parts washing is one of the most important industrial stages. It uses professional cleaners and specialized machines that have been created to serve the automotive domain exclusively. These washers are so performing that they can degrease and dry even the smallest and most clogged components, which is very common especially in this particular industry. This way, the parts are prepared for the following steps: painting, coating, lubrication and eventually, assembly. The cleaning solutions come in a wide variety of efficient options and it seems like lately one of the most popular choice is water based chemicals. Aqueous parts washer manufacturers offer their customers reliable products that are not only efficient, but also sustainable and ecofriendly.
In order to deliver good results, your washer has to work at full capacity and have certain qualities. So when purchasing aqueous cleaners, there are several aspects you should keep in mind. There are many types of solutions you can choose from: some use water, others are just water based, while others consist in natural solvents that boil away dirt. They also come in multiple forms: as spray gun cleaner, as solvents that must be added to a container, as ultrasonic washers and so on. In addition to this, you need to be careful and pick a washing substance that matches the cleaning machine’s features. The device must have clear, easy to use functions, and meet your specific needs depending on the type of parts you will be using it for.
Safe Solvents is one of the most reliable providers of cleaning equipment for automobile parts washing. But before purchasing aqueous solutions for cleaning, here are some other criteria to consider:
Speed of action – First and foremost, you must know how long it takes for your cleaner to remove dirt. Given the fact that it is water based it may take time until it delivers the desired outcome, and you should be prepared to approximate when the parts will be ready for further processing. If your company is producing large amounts of parts in a short time, then you probably need a product that is both speedy and efficient.
Safety risks – Fortunately, aqueous solvents do not represent a danger for the workers operating them and this is one of the main reasons why more and more buyers are choosing them over petroleum based solutions. These cleaners are considered hazardous for people’s health, since they contain chemicals that are extremely toxic and can even increase the risk of cancer for people nearby. Aqueous substances, however, are nonflammable and have no volatile compounds, so the risk of work accidents and the liability of toxic disposal is minimized.
Environmental impact – Besides offering your employees a safe place to work in, it is also very important to provide a safe atmosphere and protect the environment. For this reason, aqueous parts washers make an ideal choice. They do not evaporate such as petroleum based solvents, plus they will help you reduce costs associated with waste disposal.